Product |
|
Type | Huis van Constructiepanelen |
---|---|
Type massief hout | Europees naaldhout |
Soort | Gewone spar (Picea abies) - vurenhout |
Specificaties |
|
Volume | 45 m3 Vlek – 1 keer Overzetten |
Beschrijving |
We bring to your attention that the plates consist of several layers cross-glued together. The plates have an independent bearing capacity, can be connected to each other in a spike-groove, and are used for walls and ceilings (floors-ceilings). Great load-bearing strength! At the same time, it does not require as much array as is used in timber and chopped houses, everything is much more economical. The main load is borne by the beam-rack structure, which is filled and thereby reinforced with multi-layer wall panels. At the same time, the thickness of the panel is equal to 60 mm, fixed between the pillars and connected in a spike-groove with each other gives a complete feeling of a monolithic, heavy structure (no sound of emptiness when tapping as in frame houses sheathed with gypsum and clapboard). Unlike timber and especially frame-type houses, assembly on the construction site is several times faster. In addition, interior decoration is not required at all. Unlike traditional CLT technology, the roughness of our plates is P120-150 (against traditional P40). The quality of the front surface of our plates is furniture. There are no gaps between the lamellae (in traditional CLT they will definitely be, a feature of the technology), no falling knots, etc.
The houses due to the use of our panels have a new appearance, modern and premium. The visible inner side of the plates (10-20 mm of the total thickness) can be made from any kind of wood: cedar, larch, oak, etc. At the same time, it creates a complete feeling that the whole house is made of these rocks. Premium finish, will be an advantage, given the material savings! The walls do not shrink due to the use of CLT material, they are extremely stable. (no need to wait until the house sits down, collected – live right away). The walls outside can be lined with any traditional materials, including fragile ones. We recommend to insulate the walls from the outside with an eco-friendly slab insulation based on wood chips (beltermo, isoplaat). At the same time, the insulation is “targeted" to the wall itself from clt plates. The speed of such an assembly is very high. The facade, you can use any, the design will not change from this. The strength of the technology of construction of multilayer profiled panels is also the fact that during the construction of houses of absolutely any configuration, the same universal elements are used, ready-made, not requiring modification and always available in stock. We offer turnkey houses, with furniture of our own production and design, which allows you not to waste time and money on finalizing details. However, it is possible to offer a solution according to the individual wishes of customers. Even in small houses with a layout of 3×6, we have everything you need, a sauna, a bath, a shower, a kitchenette and a full bed. The height of the walls is at least 2700 mm, for a comfortable stay, otherwise, as it happens everywhere, a small ceiling height does not allow you to breathe fresh air comfortably. |
Prijs & voorwaarden |
|
Prijs | Op aanvraag EUR Overzetten |
Incoterm | FCA - franco transporteur Land Rusland |
Verkoopt aan: | Wereldwijd |
By registering you agree to our Algemene voorwaarden
De soort informatie die we gebruiken om de rating samen te stellen: