Product |
|
Type Categorie | Hakmachine - Ontschorsingsmachine - Splijtmes |
---|---|
Categorie | Machine voor Het Versnijden van Hout Tot Spaanders |
Merk | Teknamotor |
Model | 250 R |
Specificaties |
|
Toestand van het item | Nieuw |
Fabricagedatum | 2024 |
Volume | 1 - 1 Overzetten |
Gewicht | 960 |
Beschrijving |
Skorpion 250 R is designed for shredding tree limbs and trunks with a diameter of up to 250 mm. Skorpion 250R is a disc model with a pneumatic blow-out system on the disc. Chips are ejected through the rotating chimney which can turn by 360 degrees in relation to the chassis. The cutting system consists of a disc with cutting knives sharpened on either side.
The chipper has a three-point suspension system and is designed to work with an above 80 hp farm tractor. The drive is transmitted from PTO shaft of a tractor with the speed of 540 revolutions per minute. Its feed system consists of two pulling rollers, driven by separate hydraulic motors from a hydraulic pump mounted on the chipper. Safety of the operator of a chipper is ensured by a cable safety switch attached, which - by pulling the cord in any direction - causes the hydraulic feed system to stop immediately. Unlocking the system takes place by releasing / unlocking the EMERGENCY STOP button to the work position. The wood chipper equipped with an electronic No-stress system that automatically prevents overloading of the drive system by temporarily stopping the feed system. Editing the No-stress overload system allows you to easily change the machine settings and adjust them to individual needs. The program "thick wood", "thin wood" allows a quick change of the working mode of the chipper to suit the currently shredded material and more effective work of the wood chipper. This system has a built-in hourly meter. Chips made by Skorpion 250 R can be used as a solid fuel for heating in buildings (burning in ovens/stoves), as raw material to produce compost, for decorative purposes in gardens, parks, etc., and after additional disintegrating in a mill for production of pellets and briquettes. Overall dimensions (length x width x height) 2500 x 2030 x 2560 [mm] Weight 960 [kg] Branch diameter 250 [mm] No of knives 2 or 3 cutting + 2 counter-knife Feeding speed up to 42 [running meters/min] Chipping capacity up to 18 [stère meters/h] Chip width from 9 to 14 [mm] Feeding unit hydraulic feeder Disk diameter 800 [mm] Hopper dimensions (width x height) 420 x 255 [mm] Min. power of tractor 80 [hp] Equipment included: -PTO shaft -Independent hydraulic system -Adjustment of height of ejecting the chips -Rotary chimney 360° -No-stress system Additional accessories on request: -Extension of the ejection tube |
Prijs & voorwaarden |
|
Prijs | Op aanvraag |
Verkoopt aan: | Wereldwijd |
By registering you agree to our Algemene voorwaarden
De soort informatie die we gebruiken om de rating samen te stellen: