2 sided planer REX U-41K

  • Aanbieding
    18146786
  • Datum
    2017-06-16
  • Staat : Het aanbod werd ingetrokken

Product

Type Categorie Moulding and planing machines
Categorie Moulding machines for three- and four-side machining
Merk REX

Specificaties

Toestand van het item Gebruikt
Fabricagedatum 2004
Volume 1 Overzetten
Beschrijving
2 sided planer REX U-41K


- Year built 2004
- Good technical condition
- In stock


TECHNICAL PARAMETERS :

- The width of a treating 2 x 410 mm
- The amount of a treating 10 - 260 mm


- Number of spindles 2
- Spindle configuration bottom-up
- The speed of spindle 5200 U / min


- 11-11 kW engine horsepower
- Variable feed 5 - 45 m / min
- Adjusts the front top
- Adjust the table up / down 4 cylinders


- TABLE PODNOSZONY POWER; UP AND DOWN

- 3 pinch rolls countertop LOWER INCLUDING: 1 GEAR, 2 SMOOTH
- 2 ROLLS AUXILIARY
- 2 pinch rolls UPPER
- 1 draw roller SOFT TOP


NUMBER OF KNIFE:
- At the top shaft - 4 pieces
- The shaft bottom - 4 pieces
- Diameter of suction fi 100


- Power feed 3 kW
- Feed Kardan
- Total installed capacity of 38 KW
- Feeders at the entrance
- Receiving the output Feeders


The line consists of:

Roller conveyor:
- A length of about 21 m.
- Working width 1100 mm,
- With electric drive 3 strings
- With manual control for 4 sections of the track,


1 galvanized protective wall, with hinged metal gate to control the production process the height of 2200 mm,

- Height 2,000 mm
- Width 1600 mm,


1 high-roller conveyor with tilt (tipper)

- 6000 mm in length,
- Working width 5000 mm,
- Electric, chain and technology discharging without tilting.


Hay with a length of about 2400 mm,

Laying bare wood and panels of up to 5500 mm, width 1200 mm, feed roller.

The maximum width is 1200 mm plate,

4-wire mechanization for the separation of raw wood with electric drive for tilting the table sortowniczego.


Massive roller conveyor,

- Working width 800 mm,
- Height 1000 mm,
- The length of 5000 mm,
- The support base steel, with three bays to the handgrip element


Crosscut MOST MPC 800/600

- Year 2009
- Serial number 49 04 520
- Main engine power of 7.5 kW,
- Weight 520 kg

- Maximum speed of the saw blade 72.8 m / s
- Blade diameter of 700 mm,

- Control box and a button to control the rate


Two modular conveyor belt for sorting elements SFB 3200/2800

- The year of manufacture 2009
- Serial number 0928,
- Length of 3,500 mm,
- Width of 4.000 mm, with each module having a width of about 2.000 mm.
- Weight Ca. 500 kg


Feeder wibrorynna Huber RHVR 35-15 / 6, QM

- Year 2009
- Serial number 40404,
- Length 6000 mm,
- Width of about 270mm,
- Mounted on a steel supporting structure, vibration motor to feed material into the chipper, the colt is transported by conveyor belt with drivers



Chipper Huber RHKM 35-15S,

- Year of 2009,
- Serial number 40405,
- Working width 300 mm,
- Control panel and cabinet with fuses,

A machine with 1 cutting edge and a built-in hydraulic unit, power 15 kW



Conveyor Belt,

- Working width 400 mm,
- Height of 2400 mm,
- Horizontal conveyor 800 mm,
- Vertical conveyor 2800 mm, with electric motor


Planer Rex U-41K,

- The year 2004,
- Serial number 22.552,
- The machine in a soundproof enclosure with dimensions of 2300 mm x 1900 mm.

Sliding doors with glazing
- Height 3000 mm
- Electric conveyor
- Working width 300mm,
- The length of 9000 mm,

3 ejectors displacing the transversal feeder comprising 6 trays integrated chain.

Prijs & voorwaarden

Prijs Op aanvraag
Verkoopt aan: Wereldwijd

Verkopers

Het spijt ons, maar deze aanbieding is niet meer beschikbaar. Maar geen probleem! Vul simpelweg onderstaand formulier in, om vervolgens reacties te krijgen van gelijkstemmige, nieuwe beschikbaarheden.

 Ik bevestig dat ik de Fordaq's privacybeleid heb gelezen en begrepen.

By registering you agree to our Algemene voorwaarden

Similar postings
aanbieding 16 Mar 2024 04:00

Moulding Machines For Three- And Four-side Machining, Weinig, Gebruikt

van Mercator S.R.L.
aanbieding 10 Jan 2024 11:38

Moulding Machines For Three- And Four-side Machining, Weinig, Gebruikt

van StanDrew Sp. z o.o. Sp. komandytowa
aanbieding 12 Mar 2024 10:41

Moulding Machines For Three- And Four-side Machining, Weinig, Gebruikt

van Wood Solutions Maszyny Stolarskie
aanbieding 06 Mar 2024 16:37

Moulding Machines For Three- And Four-side Machining, Griggio, Gebruikt

van Wood Solutions Maszyny Stolarskie
De Trust rate geeft een indicatie van de mate van vertrouwen dat u in dit bedrijf kan hebben. De rating is gebaseerd op basis van informatie die wij beschikbaar hebben over dit bedrijf. We zijn geleidelijk aan het uitbreiden dus wees niet verbaasd als veel bedrijven nog niet een rating hebben.

De soort informatie die we gebruiken om de rating samen te stellen:

  • Wat voor soort contacten hebben we gehad met het bedrijf?
    Aantal contacten, bezoeken van onze medewerkers, bijeenkomsten op beurzen.
  • Geschiedenis van de activiteiten van het bedrijf op de website van Fordaq.
  • Heeft het bedrijf certificaten die door Fordaq onafhankelijk zijn gecontroleerd?
  • geverifieerd dat het bedrijf lid is van een erkende brancheorganisatie (federatie, etc)?
  • IS het bedrijf aanbevolen door andere leden?